Overview

The Automatic Vertical Sticker Labeling Machine is one of the most users friendly. The machine is used for full/partial Labeling on different size of flat or rectangular containers. The automatic model is equipped with roller spacing device resulting in a simple operation with “No change parts required”.

Operation

The filled and sealed bottle is conveyed from the Conveyor and on the same conveyor one bottle separator attachment is provide to separate the bottle from continuous movement. A sensor provided to sense the product after sensing the sensor give command to operate steeper or servo motor to release label from both side when two label is stick the gap sensor give command to stop the servo or stepper during releasing of label provision of brush to press the label & remove the air between label & bottle after completion of the cycle one operation of Labeling is finish & conveyor bring the bottle for next operation..

Key Features

High speed 100/200/300

Servo PLC based Operation

Accurate label placement

No change parts requirement

Very less down time for change over

One Touch Speed Synchronization

Web 360°

Specification

Output/Hour*	3600 to 4800 BPH
Direction of Movement	Left to Right
Controller	PLC with HMI based control
PLC	Mitsubishi / Delta make
HMI	3.5”Screen, Delta / Mitsubishi make
A.C. Drive Conveyor	0.5 HP Mitsubishi / Delta make
A.C. Drive for Feeder	0.25HP, Delta /Mitsubishi No. 2
Feeder Motor Or Worm Motor	Panasonic / RotoQ / Bonfiglioli / Hindustan
Pressing Device Motor	0.25 HP / 415 V / 50 HZ
Conveyor Motor	0.5 HP / 415 V / 50 HZ, Panasonic / RotoQ / Bonfiglioli / Hindustan
Servo Motor	750W, Mitsubishi make, 2 Nos.
A.C. Drive for Top Conveyor Motor	0.5 HP, 415 V / 50 HZ, Delta / Mitsubishi
For Flat Container	Bottle movement through Top Drive
Product Sensor	Leuze / Sick / Panasonic

Label Gap Sensor	Leuze / Sick / Panasonic
For Round Container	Bottle movement through Side Drive
Label Accuracy	+/- 1 to 2 mm
Conveyor Length	8ft
Height of Conveyor	850 mm to 900 mm Adjustable
Top Conveyor Height adjustment	Boss makes height adjustment assemble
Feeder Adjustment	Boss make height and deep adjustment assemble
Machine Dimensions**	2100 mm (L) x1800 mm (W) x 1500 (H) Approx.
Net Weight	500 Kgs. Approx.

Input Specification

Label Specifications

Length**	240mm max
Height**	100 mm max
Roll Diameter	Max 300 mm & ID 75 mm
Space between two label	Min. 3 mm anti clock wise

Utility Requirement

Electrical Supply	1 Phase + Neutral + Earthing
Electrical Load	2 KW

Salient Features

Label release mechanism.
PLC controlled product sensor to sense the product.
Break assembly to avoid variation during releasing of roll.
HMI Touch Screen to operate machine easily.
Feeder or Worm Assemble to hold bottle proper and generate the unique distance between two bottles.
Wrapping unit for wrap around Labeling.
Wrapping guide with X & Y direction setting.
Top Conveyor to hold bottle from top and bottom.
8 Ft. Conveyor to convey the product.

PLC controlled label gap sensor to sense the gap between two labels.
PLC base electronic control system for total operation of the machine with programmable L.C.D display (P.L.C.) with programming facility
Specially designed drive mechanism.
Dispensing unit to dispense labels.
Reel mechanism (Size: 305 mm) to hang the roll.
Machine made from S.S. 304
A.C. frequency variable drive for variable speed with constant torque

Dimension

FRONT & BACK LABELER (ROUND & FLAT BOTTLE)