Automatic Filling Machine Manufacturer

Automatic Double Head Auger Type Powder Filling Machine Automatic Auger type Powder filling machine is precision built on SS frame completely enclosed in stainless steel sheet and doors are provided to facilitate the servicing of machine. The auger powder filler unit is made compact and versatile in stainless steel elegantly matt finish body.


The dried, sterilized and siliconised bottles are fed through the infeed Turn Table on the infeed SS conveyor belt at the required speed for feeding. There are two Filling Heads and hence bottle reaches under the first filling head, it is held by the pneumatic bottle holder. Immediately it is be sensed by the bottle sensor and gives signals to magnetic clutch to start to rotate which is mounted on auger shaft. Auger type powder filling machine will fill the desired amount of powder to the bottle through auger, where rotation time is set in the Timer. After filling of first bottle pneumatic bottle holder releases the first bottle to move on conveyor. At the same time second bottle also moves along with the first bottle in empty condition. In the second filling head same operation is performed but this second bottle gets filled and first bottle moves further for next operation.

Key Features

bottle capping machine manufacturer

Servo PLC based Operation

cap sealing machine manufacturer

No change parts requirement

round bottle sticker labeling machine

Very less down time for change over

neck labeling machine manufacturer

One Touch Speed Synchronization


Filling Range***
5 Gms to 500 Gms (with the help of change parts)
2000-4000 containers
Direction of Movement
Left to Right
Number of Head / Syringe
2 Nos.
Height of Conveyor
850 mm to 900 mm Adjustable
Hopper Capacity
45 Liter Each Head
Starrier Motor
60W RotoQ, 2 Nos.
0.5 HP / 415 Volts / 50 Hz. Hindustan / Bonfiglioli make
Servo Motor
400W / 750W Mitsubishi make, 2 Nos.
AC Drive
0.5 HP Mitsubishi / Delta make
Mitsubishi / Delta make
Mitsubishi / Delta make
Pneumatic Parts
Janatics / SMC / Festo make
Leuze / Sick make
Leuze / Sick make
Leuze / Sick make
Change parts required
(a) Auger (b) Funnel


Container Neck Diameter**
Container Neck Diameter**
Container Size** (Round Shape)
Ø 28 mm to Ø 100 mm Respectively height 58 mm to 240 mm (Height option for other bottle height available)
Container Size**(Flat / Square)
15mm to 100 mm (Length) Respectively 10mm to 50 mm (Width) Respectively height 58 mm x 240 mm (Height option for other bottle height available)

Utility Requirement

Electrical Supply
3 Phase + Neutral + Earthing
Electrical Load
2 KW

Salient Features

  • Servo Based PLC with HMI Control.
  • Powder Level Sensor.
  • Automatic with filling range from 5 Gms to 500 Gms
  • No container no fill system
  • Accuracy ± 1 % in single doze.
  • Body covered with SS sheet.
  • All contact parts SS 316.

  • Acrylic Cabinet.(Optional)
  • A unit to fill variety of fine and granulated powder and can be used for various type of containers.
  • Minimum change over time of change parts
  • Safety guards for all doors, motor & conveyor.
  • The unit is made compact & versatile as per GMP norms.


Boss Packaging Solutions Limited Packaging Machinery & Integrated Lines

Please click the below to download our brochure content.

automatic bottle capping machine


Got a project?

Let’s Talk.

All Copyrights © 2024 Boss Packaging Solutions Limited