The Rotary Bottle Washing Machine is compact and highly efficient machine with elegant look. This multifunctional multi featured machine meets the GMP requirements of washing for glass and plastic bottles. The machine operates on the rotary principle with “GENEVA” mechanism and requires manual loading and unloading of bottles.
The bottles are loaded on the subsequent indexing part of rotating platform and are cleaned in series of operations. Specially designed bottle holders provided to hold bottles with neck diameter. The bottles are placed in an inverted position in these cup shaped holders. Spraying showers does the external cleaning of the bottles. Solenoid valves are provided to enable the regulation of wash timings, it also spraying water when bottle are stopped means insure saving of water, and sequence of various washing media to suit specific requirement.
Output / Hour* |
2600 to 6000 |
No.of Container Holder |
64 |
Direction of Machine** |
Clock wise |
Main Motor |
0.5 HP / 415 Volts / 50 Hz |
Pump Two Nos. |
0.5 HP x 2 = 1 HP / 415 Volts / 50 Hz |
Electrical Heater |
3 KW |
Main Motor |
0.5 HP / 415 Volts / 50 Hz |
Tank Capacity |
75 Ltrs. S.S. 304 (2 Nos.) |
Wash Cycle |
4 Inner+1 Outer (optional air cycle available) |
Working height |
850 to 900 mm |
Change parts required |
(A) Neck Dia: Bottle holding pocket. (B) Flat Container: Special type of cup. |
Electrical Supply |
3 Phase + Neutral + Earthing |
Electrical Load |
2 KW + 3 KW for heater |
Air Pressure: Minimum |
6 Bar Pressure 5 CFM |
Please click the below to download our brochure content.
